CRICKET

RSS NEWS
+ ADD TO YOUR WEBSITE
+ ADD TO WORDPRESS
                     

Cricket Wikipedia



This article is about the sport. For the insect, see Cricket (insect). For other uses, see Cricket (disambiguation).
"Cricketer" redirects here. For other uses, see Cricketer (disambiguation).


Cricket
Pollock to Hussey.jpg
A bowler bowling to a batsman. The paler strip is the cricket pitch. The two sets of three wooden stumps on the pitch are the wickets. The two white lines are the creases.
Highest governing bodyInternational Cricket Council
First played18th century (modern), England
Characteristics
Team members11 players per side


with some substitute players (can act as fielders only) permitted (in cases of injury, illness, fatigue).
Mixed genderSingle
TypeTeam, Bat-and-ball
EquipmentCricket ball, cricket bat,


wicket: stumps, bails , several protective gear.
VenueCricket field
Presence
Olympic1900 Summer Olympics only
Cricket is a bat-and-ball game played between two teams of 11 players each on a field at the centre of which is a rectangular 22-yard long pitch. Each team takes its turn to bat, attempting to score runs, while the other team fields. Each turn is known as an innings.

The bowler delivers the ball to the batsman who attempts to hit the ball with his bat away from the fielders so he can run to the other end of the pitch (which is counted as one run) without getting run out (the event in which the fielder throws the ball directly onto wickets or to a player who is near to wickets so he can dislodge them from the ground before the batsman or the non-striker has reached the crease). Each batsman (the other is called non-striker) continues batting until he is out. The batting team continues batting until ten batsmen are out or specified number of overs (defined as 6 countable balls bowled) have been bowled, at which point the teams switch roles and the fielding team comes in to bat.

In professional cricket the length of a game ranges from 20 overs of six bowling deliveries per side to Test cricket played over five days. The Laws of Cricket are maintained by the International Cricket Council (ICC) and the Marylebone Cricket Club (MCC) with additional Standard Playing Conditions for Test matches and One Day Internationals.

Cricket was first played in southern England in the 16th century. By the end of the 18th century, it had developed to be the national sport of England. The expansion of the British Empire led to cricket being played overseas and by the mid-19th century the first international match was held. ICC, the game's governing body, has 10 full members. The game is most popular in Australasia, England, the Indian subcontinent, the West Indies and Southern Africa.

Contents

              History

              Main article: History of cricket
              Early cricket was at some time or another described as "a club striking a ball (like) the ancient games of club-ball, stool-ball, trap-ball, stob-ball". Cricket can definitely be traced back to Tudor times in early 16th-century England. Written evidence exists of a game known as creag being played by Prince Edward, the son of Edward I (Longshanks), at Newenden, Kent in 1301 and there has been speculation, but no evidence, that this was a form of cricket.

              A number of other words have been suggested as sources for the term "cricket". In the earliest definite reference to the sport in 1598, it is called creckett. Given the strong medieval trade connections between south-east England and the County of Flanders when the latter belonged to the Duchy of Burgundy, the name may have been derived from the Middle Dutch krick(-e), meaning a stick (crook); or the Old English cricc or cryce meaning a crutch or staff. In Old French, the word criquet seems to have meant a kind of club or stick. In Samuel Johnson's Dictionary, he derived cricket from "cryce, Saxon, a stick". Another possible source is the Middle Dutch word krickstoel, meaning a long low stool used for kneeling in church and which resembled the long low wicket with two stumps used in early cricket. According to Heiner Gillmeister, a European language expert of Bonn University, "cricket" derives from the Middle Dutch phrase for hockey, met de (krik ket)sen (i.e., "with the stick chase"). Dr Gillmeister believes that not only the name but the sport itself is of Flemish origin.



              The first English touring team on board ship at Liverpool in 1859
              The earliest definite reference to cricket being played in England (and hence anywhere) is in evidence given at a 1598 court case which mentions that "creckett" was played on common land in Guildford, Surrey, around 1550. The court in Guildford heard on Monday, 17 January 1597 (Julian date, equating to the year 1598 in the Gregorian calendar) from a 59 year-old coroner, John Derrick, who gave witness that when he was a scholar at the "Free School at Guildford", fifty years earlier, "hee and diverse of his fellows did runne and play [on the common land] at creckett and other plaies." It is believed that it was originally a children's game but references around 1610 indicate that adults had started playing it and the earliest reference to inter-parish or village cricket occurs soon afterwards. In 1624, a player called Jasper Vinall was killed when he was struck on the head during a match between two parish teams in Sussex.

              During the 17th century, numerous references indicate the growth of cricket in the south-east of England. By the end of the century, it had become an organised activity being played for high stakes and it is believed that the first professionals appeared in the years following the Restoration in 1660. A newspaper report survives of "a great cricket match" with eleven players a side that was played for high stakes in Sussex in 1697 and this is the earliest known reference to a cricket match of such importance.

              The game underwent major development in the 18th century and became the national sport of England. Betting played a major part in that development with rich patrons forming their own "select XIs". Cricket was prominent in London as early as 1707 and large crowds flocked to matches on the Artillery Ground in Finsbury. The single wicket form of the sport attracted huge crowds and wagers to match. In the 1730s Frederick Prince of Wales played a major role in developing the sport. Bowling evolved around 1760 when bowlers began to pitch the ball instead of rolling or skimming it towards the batsman. This caused a revolution in bat design because, to deal with the bouncing ball, it was necessary to introduce the modern straight bat in place of the old "hockey stick" shape. The Hambledon Club was founded in the 1760s and, for the next 20 years until the formation of MCC and the opening of Lord's Old Ground in 1787, Hambledon was both the game's greatest club and its focal point. MCC quickly became the sport's premier club and the custodian of the Laws of Cricket. New Laws introduced in the latter part of the 18th century included the three stump wicket and leg before wicket (lbw).



              Don Bradman of Australia had a Test average of 99.94 and an overall first-class average of 95.14, records unmatched by any other player.
              The 19th century saw underarm bowling replaced by first roundarm and then overarm bowling. Both developments were controversial. Organisation of the game at county level led to the creation of the county clubs, starting with Sussex CCC in 1839, which ultimately formed the official County Championship in 1890. Meanwhile, the British Empire had been instrumental in spreading the game overseas and by the middle of the 19th century it had become well established in India, North America, the Caribbean, South Africa, Australia and New Zealand. In 1844, the first international cricket match took place between the United States and Canada (although neither has ever been ranked as a Test-playing nation).



              Sachin Tendulkar of India was rated by Wisden Cricketers' Almanack in 2002 as the second greatest Test batsman of all time, behind Don Bradman.
              In 1859, a team of England players went on the first overseas tour (to North America). The first Australian team to tour overseas was a team of Aboriginal stockmen who travelled to England in 1868 to play matches against county teams. In 1862, an English team made the first tour of Australia and in 1876–77, an England team took part in the first-ever Test match at the Melbourne Cricket Ground against Australia.

              W.G. Grace started his long career in 1865; his career is often said to have revolutionised the sport. The rivalry between England and Australia gave birth to The Ashes in 1882 and this has remained Test cricket's most famous contest[citation needed]. Test cricket began to expand in 1888–89 when South Africa played England. The last two decades before the First World War have been called the "Golden Age of cricket". It is a nostalgic name prompted by the collective sense of loss resulting from the war, but the period did produce some great players and memorable matches, especially as organised competition at county and Test level developed.

              The inter-war years were dominated by one player: Australia's Don Bradman, statistically the greatest batsman of all time. It was the determination of the England team to overcome his skill that brought about the infamous Bodyline series in 1932–33, particularly from the accurate short-pitched bowling of Harold Larwood. Test cricket continued to expand during the 20th century with the addition of the West Indies, India, and New Zealand before the Second World War and then Pakistan, Sri Lanka, and Bangladesh in the post-war period. However, South Africa was banned from international cricket from 1970 to 1992 because of its government's apartheid policy.

              Cricket entered a new era in 1963 when English counties introduced the limited overs variant. As it was sure to produce a result, limited overs cricket was lucrative and the number of matches increased. The first Limited Overs International was played in 1971. The governing International Cricket Council (ICC) saw its potential and staged the first limited overs Cricket World Cup in 1975. In the 21st century, a new limited overs form, Twenty20, has made an immediate impact.

              Rules and game-play

              Main article: Laws of cricket

              Summary

              Cricket is a bat and ball game, played between two teams of eleven players each. One team bats, attempting to score runs, while the other bowls and fields the ball, attempting to restrict the scoring and dismiss the batsmen. The objective of the game is for a team to score more runs than its opponent. In some forms of cricket, it may also be necessary to dismiss the opposition in order to win the match, which would otherwise be drawn.

              There are separate leagues for Women's cricket, though informal matches may have mixed teams.

              Format of the game

              A cricket match is divided into periods called innings (which ends with "s" in both singular and plural form). It is decided before the match whether the teams will have one innings or two innings each. During an innings one team fields and the other bats. The two teams switch between fielding and batting after each innings. All eleven members of the fielding team take the field, but only two members of the batting team (two batsmen) are on the field at any given time. The order of batsmen is usually announced just before the match, but it can be varied.

              A coin toss is held by the team captains (who are also players) just before the match starts: the winner decides whether to bat or field first.

              The cricket field is usually oval in shape, with a rectangular pitch at the center. The edge of the playing field is marked with a boundary, which could be a fence, part of the stands, a rope or a painted line.

              At each end of the pitch is a wooden target called a wicket, placed 22 yards apart. The pitch is marked with painted lines: a bowling crease in line with the wicket, and a batting or popping crease four feet in front of it. The wicket is made of three vertical stumps supporting two small horizontal bails. A wicket is put down if at least one bail is dislodged, or one stump is knocked down (usually by the ball, but also if the batsman does it with his body, clothing or equipment). This is also described as breaking, knocking down, or hitting the wicket – though if the ball hits the wicket but does not dislodge a bail or stump then it is not down.

              At any instant each batsman owns a particular wicket (usually the one closer to him) and, except when actually batting, is safe when he is in his ground. This means that at least one part of his body or bat is touching the ground behind the popping crease. If his wicket is put down while the ball is live and he is out of his ground then he is dismissed, but the other batsman is safe.
              A ball being bowled. From back to front -- umpire (with hat), wicket, non-striking batsman (yellow), bowler (blue), ball, pitch, crease, striking batsman (yellow), wicket, wicket keeper (blue,crouching) and fielder (blue,slip position)

              The two batsmen take positions at opposite ends of the pitch. One designated member of the fielding team, called the bowler, bowls the ball from one end of the pitch to the striking batsman at the other end. The batsman at the bowling end is called the non-striker, and stands to the side of his wicket, behind his crease. The batsman are allowed to step forward of their creases, though at some risk. Another member of the fielding team, the wicket keeper, is positioned behind the striker's wicket.

              The fielding team's other nine members stand outside the pitch, spread out across the field. The fielding captain often strategically changes their position between balls.

              There is always an umpire at each end of the pitch.

              The bowler usually retreats a few yards (metres) behind the wicket, runs towards it (his run-up), and then releases the ball over-hand as he reaches the bowling crease. (If he crosses the crease before he releases the ball, or if he flexes his elbow too much in a throw, then it is a no ball, and the batting team gets a penalty or extra run. If the ball passes the far wicket out of reach of the batsman then it is called a wide, also with an extra run.) The ball can be bowled so that it bounces on the pitch, lands exactly on the crease (a yorker), or crosses the crease without bouncing (a full toss).

              The batsman tries to prevent the ball from hitting the wicket by striking the ball with his bat. (This includes the handle of the bat, and his gloves.) If the bowler succeeds in putting down the wicket the batsman is dismissed and is said to be bowled out. If the batsman misses the ball, but any part of his body prevents it from reaching the wicket, then he is out leg before wicket, or "LBW".

              If the batsman hits the ball but it is caught by a fielder without bouncing then he caught out. If it is caught by the bowler then he is caught and bowled; by the wicket keeper, caught behind.

              If the batsman is successful in striking the ball and it is not caught without bouncing, then the two batsmen may try to score points (runs) for their team. Both batsmen run the length of the pitch, exchanging positions, and grounding their bats behind the opposite crease. Each crossing and grounding by both batsmen is worth one run. The batsmen may attempt one run, multiple runs, or elect not to run at all. By attempting runs, the batsmen risk dismissal. This happens if the fielding team retrieves the ball and hits either wicket with the ball (either by throwing it, or while holding it) before the batsman who owns that wicket reaches his ground behind the crease. The dismissed batsman is run out. Batsmen will sometimes start to run, change their mind, and return to their original positions.

              If the batsman hits the ball over the field boundary without the ball touching the field, the batting team scores six runs. If the ball touches the ground and then reaches the boundary, the batting team scores four runs. The batsmen might start running before the ball reaches the boundary, but those runs don't count.

              If the batsman misses the ball they can still attempt extra runs : these are called byes. If the ball bounces off his body then it is called a leg bye.

              If the striking batsman leaves his ground and misses the ball, then the wicket keeper can catch it and put down the wicket -- stumped.

              In case of a no ball or a wide the batsman can choose to strike the ball, earning runs in addition to the fixed penalty. If he does so he can only be dismissed by being run out.

              When the batsmen have finished attempting their runs the ball is dead, and is returned to the bowler to be bowled again. The ball becomes live when he starts his run up. The bowler continues to bowl toward the same wicket, regardless of any switch of the batsmen's positions.

              A batsman may retire from an innings without being dismissed, usually after reaching a milestone like a hundred runs (a century).

              A dismissed batsman leaves the field, to be replaced by another batsman from the batting team. However, even though the wicket may have been put down, or the ball caught, the batsman is not actually dismissed until the fielding team appeal to the umpires for a decision, traditionally using the expression "How's that" (or "Howzat"). In some matches, particularly test matches, either team may request a review by a third umpire who can use a Decision Review System (DRS), which includes TV replays and other electronic equipment such as hawk eye, hotspot and the snickometer.

              After a bowler has bowled six times (an over), another member of the fielding team is designated as the new bowler, the old bowler taking up a fielding position. The batsmen stay in place, and the new bowler bowls to the opposite wicket, so the role of striker and non-striker reverse. The wicket keeper and the two umpires always change positions, as do many of the fielders, and play continues. Fielding team members may bowl multiple times during an innings, but may not bowl two overs in succession.

              The innings is complete when 10 of the 11 members of the batting team have been dismissed (all out – although one always remaining "not out"), when a set number of overs has been played, or when the batting team declares that they have enough runs.

              The number of innings and the number of overs per innings vary depending on the format of the match. In a match which is not a limited overs format the umpires will usually specify that the last session of the last innings will have a specified number of overs.

              The match always ends when all innings have been completed. The umpires can also call an end to the match in case of bad light or weather. But in many cases the match ends immediately when the first team to bat has played all of its innings, and the last team to bat has more runs. In four-innings games the last team may not even need to play its second innings: this team is said to win by an innings. If this winning team has not completed its last innings, and still has, for example, five batsmen who are not out or have not even batted, then they are said to "win by five wickets". If the last team to bat is losing, is all out, and has 10 fewer runs than the other team, then the winning team "wins by 10 runs". If the two teams both play all their innings and they have the same number of runs, then it is a tie.

              In four-innings matches there is also the possibility of a draw: the team with fewer runs still has batsmen on the field when the game ends. This has a major effect on strategy: a team will often declare an innings when they have accumulated enough runs, in the hope that they will have enough time left to dismiss the other team and thus avoid a draw, but risking a loss if the other team scores enough runs.

              Pitch, wickets and creases

              Main articles: Cricket pitch, Wicket and Crease (cricket)
              See also: Stump (cricket) and Bail (cricket)



              A typical cricket field.
              Playing surface

              Cricket is played on a grassy field. The Laws of Cricket do not specify the size or shape of the field, but it is often oval. In the centre of the field is a rectangular strip, known as the pitch.



              The cricket pitch dimensions
              The pitch is a flat surface 10 feet (3.0 m) wide, with very short grass that tends to be worn away as the game progresses. At either end of the pitch, 22 yards (20 m) apart, are placed wooden targets, known as the wickets. These serve as a target for the bowling (also known as the fielding) side and are defended by the batting side, which seeks to accumulate runs.

              Stumps, bails and creases



              A wicket consists of three stumps that are hammered into the ground, and topped with two bails.
              Each wicket on the pitch consists of three wooden stumps placed vertically, in line with one another. They are surmounted by two wooden crosspieces called bails; the total height of the wicket including bails is 28.5 inches (720 mm) and the combined width of the three stumps, including small gaps between them is 9 inches (230 mm).

              Four lines, known as creases, are painted onto the pitch around the wicket areas to define the batsman's "safe territory" and to determine the limit of the bowler's approach. These are called the "popping" (or batting) crease, the bowling crease and two "return" creases.

              The stumps are placed in line on the bowling creases and so these creases must be 22 yards (20 m) apart. A bowling crease is 8 feet 8 inches (2.64 m) long, with the middle stump placed dead centre. The popping crease has the same length, is parallel to the bowling crease and is 4 feet (1.2 m) in front of the wicket. The return creases are perpendicular to the other two; they are adjoined to the ends of the popping crease and are drawn through the ends of the bowling crease to a length of at least 8 feet (2.4 m).

              When bowling the ball, the bowler's back foot in his "delivery stride" must land within the two return creases while at least some part of his front foot must land on or behind the popping crease. If the bowler breaks this rule, the umpire calls "No ball".

              The importance of the popping crease to the batsman is that it marks the limit of his safe territory. He can be dismissed stumped or run out (see Dismissals below) if the wicket is broken while he is "out of his ground".

              Bat and ball

              Main articles: Cricket bat and Cricket ball
              Used white ball
              Used red ball
              Two different types of cricket balls:

              i) A used white ball. White balls are mainly utilised in limited overs cricket, especially in matches played at night, under floodlights (left).


              ii) A used red ball, Red balls are utilised in Test cricket and first-class cricket and some other forms of cricket (right).


              NB Both balls are the same size.

              The essence of the sport is that a bowler delivers the ball from his end of the pitch towards the batsman who, armed with a bat is "on strike" at the other end.

              The bat is made of wood (usually White Willow) and has the shape of a blade topped by a cylindrical handle. The blade must not be more than 4.25 inches (108 mm) wide and the total length of the bat not more than 38 inches (970 mm).

              The ball is a hard leather-seamed spheroid, with a circumference of 9 inches (230 mm). The hardness of the ball, which can be delivered at speeds of more than 90 miles per hour (140 km/h), is a matter for concern and batsmen wear protective clothing including pads (designed to protect the knees and shins), batting gloves for the hands, a helmet for the head and a box inside the trousers (to protect the crotch area). Some batsmen wear additional padding inside their shirts and trousers such as thigh pads, arm pads, rib protectors and shoulder pads. The ball has a "seam": six rows of stitches attaching the leather shell of the ball to the string and cork interior. The seam on a new ball is prominent, and helps the bowler propel it in a less predictable manner. During cricket matches, the quality of the ball changes to a point where it is no longer usable, and during this decline its properties alter and thus influence the match.

              Umpires and scorers

              Main articles: Umpire (cricket) and Scorer
              The game on the field is regulated by two umpires, one of whom stands behind the wicket at the bowler's end, the other in a position called "square leg", a position 15–20 metres to the side of the "on strike" batsman. The main role of the umpires is to adjudicate on whether a ball is correctly bowled (not a no ball or a wide), when a run is scored, and whether a batsman is out (the fielding side must appeal to the umpire, usually with the phrase How's That?). Umpires also determine when intervals start and end, decide on the suitability of the playing conditions and can interrupt or even abandon the match due to circumstances likely to endanger the players, such as a damp pitch or deterioration of the light.



              An umpire
              Off the field and in televised matches, there is often a third umpire who can make decisions on certain incidents with the aid of video evidence. The third umpire is mandatory under the playing conditions for Test matches and limited overs internationals played between two ICC full members. These matches also have a match referee whose job is to ensure that play is within the Laws of cricket and the spirit of the game.

              The match details, including runs and dismissals, are recorded by two official scorers, one representing each team. The scorers are directed by the hand signals of an umpire. For example, the umpire raises a forefinger to signal that the batsman is out (has been dismissed); he raises both arms above his head if the batsman has hit the ball for six runs. The scorers are required by the Laws of cricket to record all runs scored, wickets taken and overs bowled; in practice, they also note significant amounts of additional data relating to the game.

              Innings




              Jacques Kallis of South Africa is one of the greatest all-rounders of all time, being the only cricketer in the history of the game to hold more than 11,000 runs and 250 wickets in both one day and Test match cricket.
              The innings (ending with 's' in both singular and plural form) is the term used for the collective performance of the batting side. In theory, all eleven members of the batting side take a turn to bat but, for various reasons, an innings can end before they all do so. Depending on the type of match being played, each team has one or two innings apiece.

              The main aim of the bowler, supported by his fielders, is to dismiss the batsman. A batsman when dismissed is said to be "out" and that means he must leave the field of play and be replaced by the next batsman on his team. When ten batsmen have been dismissed (i.e., are out), then the whole team is dismissed and the innings is over. The last batsman, the one who has not been dismissed, is not allowed to continue alone as there must always be two batsmen "in". This batsman is termed "not out".

              An innings can end early for three reasons: because the batting side's captain has chosen to "declare" the innings closed (which is a tactical decision), or because the batting side has achieved its target and won the game, or because the game has ended prematurely due to bad weather or running out of time. In each of these cases the team's innings ends with two "not out" batsmen, unless the innings is declared closed at the fall of a wicket and the next batsman has not joined in the play.

              In limited overs cricket, there might be two batsmen still "not out" when the last of the allotted overs has been bowled.

              Overs

              Main article: Over (cricket)
              The bowler bowls the ball in sets of six deliveries (or "balls") and each set of six balls is called an over. This name came about because the umpire calls "Over!" when six balls have been bowled. At this point, another bowler is deployed at the other end, and the fielding side changes ends while the batsmen do not. A bowler cannot bowl two successive overs, although a bowler can bowl unchanged at the same end for several overs. The batsmen do not change ends and so the one who was non-striker is now the striker and vice-versa. The umpires also change positions so that the one who was at square leg now stands behind the wicket at the non-striker's end and vice-versa.

              Team structure

              A team consists of eleven players. Depending on his or her primary skills, a player may be classified as a specialist batsman or bowler. A well-balanced team usually has five or six specialist batsmen and four or five specialist bowlers. Teams nearly always include a specialist wicket-keeper because of the importance of this fielding position. Each team is headed by a captain who is responsible for making tactical decisions such as determining the batting order, the placement of fielders and the rotation of bowlers.

              A player who excels in both batting and bowling is known as an all-rounder. One who excels as a batsman and wicket-keeper is known as a "wicket-keeper/batsman", sometimes regarded as a type of all-rounder. True all-rounders are rare as most players focus on either batting or bowling skills.

              Bowling

              Main articles: Bowler (cricket), Bowling (cricket) and Bowling strategy (cricket)



              Shoaib Akhtar of Pakistan hold's the record for delivering the fastest ball (161.3 km/h) of cricket history.



              A typical bowling action
              The bowler reaches his delivery stride by means of a "run-up", although some bowlers with a very slow delivery take no more than a couple of steps before bowling. A fast bowler needs momentum and takes quite a long run-up, running very fast as he does so.

              The fastest bowlers can deliver the ball at a speed of over 90 miles per hour (140 km/h) and they sometimes rely on sheer speed to try and defeat the batsman, who is forced to react very quickly. Other fast bowlers rely on a mixture of speed and guile. Some fast bowlers make use of the seam of the ball so that it "curves" or "swings" in flight. This type of delivery can deceive a batsman into mistiming his shot so that the ball touches the edge of the bat and can then be "caught behind" by the wicketkeeper or a slip fielder.

              At the other end of the bowling scale is the "spinner" who bowls at a relatively slow pace and relies entirely on guile to deceive the batsman. A spinner will often "buy his wicket" by "tossing one up" (in a slower, higher parabolic path) to lure the batsman into making a poor shot. The batsman has to be very wary of such deliveries as they are often "flighted" or spun so that the ball will not behave quite as he expects and he could be "trapped" into getting himself out.

              In between the pacemen and the spinners are the "medium pacers" who rely on persistent accuracy to try and contain the rate of scoring and wear down the batsman's concentration.

              All bowlers are classified according to their looks or style. The classifications, as with much cricket terminology, can be very confusing. Hence, a bowler could be classified as LF, meaning he is a left arm fast bowler; or as LBG, meaning he is a right arm spin bowler who bowls deliveries that are called a "leg break" and a "Googly".

              During the bowling action the elbow may be held at any angle and may bend further, but may not straighten out. If the elbow straightens illegally then the square-leg umpire may call no-ball: this is known as "throwing" or "chucking", and can be difficult to detect. The current laws allow a bowler to straighten his arm 15 degrees or less.

              Fielding

              Main articles: Fielding (cricket) and Fielding strategy (cricket)



              Fielding positions in cricket for a right-handed batsman
              All eleven players on the fielding side take the field together. One of them is the wicket-keeper aka "keeper" who operates behind the wicket being defended by the batsman on strike. Wicket-keeping is normally a specialist occupation and his primary job is to gather deliveries that the batsman does not hit, so that the batsmen cannot run byes. He wears special gloves (he is the only fielder allowed to do so), a box over the groin, and pads to cover his lower legs. Owing to his position directly behind the striker, the wicket-keeper has a good chance of getting a batsman out caught off a fine edge from the bat. He is the only player who can get a batsman out stumped.

              Apart from the one currently bowling, the other nine fielders are tactically deployed by the team captain in chosen positions around the field. These positions are not fixed but they are known by specific and sometimes colourful names such as "slip", "third man", "silly mid on" and "long leg". There are always many unprotected areas.

              The captain is the most important member of the fielding side as he determines all the tactics including who should bowl (and how); and he is responsible for "setting the field", though usually in consultation with the bowler.

              In all forms of cricket, if a fielder gets injured or becomes ill during a match, a substitute is allowed to field instead of him. The substitute cannot bowl, act as a captain or keep wicket. The substitute leaves the field when the injured player is fit to return.

              Batting

              Main article: batting (cricket)



              English cricketer W.G. Grace "taking guard" in 1883. His pads and bat are very similar to those used today. The gloves have evolved somewhat. Many modern players utilise more defensive equipment than was available to Grace, notably helmets and arm guards.
              At any one time, there are two batsmen in the playing area. One takes station at the striker's end to defend the wicket as above and to score runs if possible. His partner, the non-striker, is at the end where the bowler is operating.

              Batsmen come in to bat in a batting order, decided by the team captain. The first two batsmen – the "openers" – usually face the hostile bowling from fresh fast bowlers with a new ball. The top batting positions are usually given to the most competent batsmen in the team, and the team's bowlers – who are typically, but not always, less skilled as batsmen – typically bat last. The pre-announced batting order is not mandatory; when a wicket falls any player who has not yet batted may be sent in next.

              If a batsman "retires" (usually due to injury) and cannot return, he is actually "not out" and his retirement does not count as a dismissal, though in effect he has been dismissed because his innings is over. Substitute batsmen are not allowed.

              A skilled batsman can use a wide array of "shots" or "strokes" in both defensive and attacking mode. The idea is to hit the ball to best effect with the flat surface of the bat's blade. If the ball touches the side of the bat it is called an "edge". Batsmen do not always seek to hit the ball as hard as possible, and a good player can score runs just by making a deft stroke with a turn of the wrists or by simply "blocking" the ball but directing it away from fielders so that he has time to take a run.

              There is a wide variety of shots played in cricket. The batsman's repertoire includes strokes named according to the style of swing and the direction aimed: e.g., "cut", "drive", "hook", "pull".

              A batsman is not required to play a shot; in the event that he believes the ball will not hit his wicket and there is no opportunity to score runs, he can "leave" the ball to go through to the wicketkeeper. Equally, he does not have to attempt a run when he hits the ball with his bat. He can deliberately use his leg to block the ball and thereby "pad it away" but this is risky because of the leg before wicket rule.

              In the event of an injured batsman being fit to bat but not to run, the umpires and the fielding captain were previously able to allow another member of the batting side to be a runner. The runner's only task was to run between the wickets instead of the incapacitated batsman, and he was required to wear and carry exactly the same equipment as the batsman. As of 2011 the ICC outlawed the use of runners as they felt this was being abused.

              Runs

              Main article: Run (cricket)



              The directions in which a right-handed batsman intends to send the ball when playing various cricketing shots. The diagram for a left-handed batsman is a mirror image of this one.
              The primary concern of the batsman on strike (i.e., the "striker") is to prevent the ball hitting the wicket and secondarily to score runs by hitting the ball with his bat so that he and his partner have time to run from one end of the pitch to the other before the fielding side can return the ball. To register a run, both runners must touch the ground behind the crease with either their bats or their bodies (the batsmen carry their bats as they run). Each completed run increments the score.

              More than one run can be scored from a single hit; but, while hits worth one to three runs are common, the size of the field is such that it is usually difficult to run four or more. To compensate for this, hits that reach the boundary of the field are automatically awarded four runs if the ball touches the ground en route to the boundary or six runs if the ball clears the boundary without touching the ground within the boundary. The batsmen do not need to run if the ball reaches or crosses the boundary.



              Brian Lara of the West Indies holds the record for highest score in both Tests and first-class cricket.
              Hits for five are unusual and generally rely on the help of "overthrows" by a fielder returning the ball. If an odd number of runs is scored by the striker, the two batsmen have changed ends, and the one who was non-striker is now the striker. Only the striker can score individual runs, but all runs are added to the team's total.

              The decision to attempt a run is ideally made by the batsman who has the better view of the ball's progress, and this is communicated by calling: "yes", "no" and "wait" are often heard.

              Running is a calculated risk because if a fielder breaks the wicket with the ball while the nearest batsman is out of his ground (i.e., he does not have part of his body or bat in contact with the ground behind the popping crease), the batsman is run out.

              A team's score is reported in terms of the number of runs scored and the number of batsmen that have been dismissed. For example, if five batsmen are out and the team has scored 224 runs, they are said to have scored 224 for the loss of 5 wickets (commonly shortened to "224 for five" and written 224/5 or, in Australia, "five for 224" and 5/224).

              Extras

              Main article: Extra (cricket)
              Additional runs can be gained by the batting team as extras (called "sundries" in Australia) due to errors made by the fielding side. This is achieved in four ways:
              1. No ball: a penalty of one extra that is conceded by the bowler if he breaks the rules of bowling either by (a) using an inappropriate arm action; (b) overstepping the popping crease; (c) having a foot outside the return crease. In addition, the bowler has to re-bowl the ball. In limited overs matches, a no ball is called if the bowling team's field setting fails to comply with the restrictions. In shorter formats of the game (20–20, ODI) the free hit rule has been introduced. The ball following a front foot no-ball will be a free-hit for the batsman, whereby he is safe from losing his wicket except for being run-out.
              2. Wide: a penalty of one extra that is conceded by the bowler if he bowls so that the ball is out of the batsman's reach; as with a no ball, a wide must be re-bowled. If a wide ball crosses the boundary, five runs are awarded to the batting side (one run for the wide, and four for the boundary).
              3. Bye: extra(s) awarded if the batsman misses the ball and it goes past the wicketkeeper to give the batsmen time to run in the conventional way (note that one mark of a good wicketkeeper is one who restricts the tally of byes to a minimum).
              4. Leg bye: extra(s) awarded if the ball hits the batsman's body, but not his bat, while attempting a legitimate shot, and it goes away from the fielders to give the batsmen time to run in the conventional way.


              When the bowler has bowled a no ball or a wide, his team incurs an additional penalty because that ball (i.e., delivery) has to be bowled again and hence the batting side has the opportunity to score more runs from this extra ball. The batsmen have to run (i.e., unless the ball goes to the boundary for four) to claim byes and leg byes but these only count towards the team total, not to the striker's individual total for which runs must be scored off the bat.

              Dismissals

              Main article: Dismissal (cricket)
              There are eleven ways in which a batsman can be dismissed; five relatively common and six extremely rare. The common forms of dismissal are "bowled", "caught", "leg before wicket" (lbw), "run out", and "stumped". Less common methods are "hit wicket", "hit the ball twice", "obstructed the field", "handled the ball" and "timed out" – these are almost unknown in the professional game. The eleventh - retired out - is not treated as an on-field dismissal but rather a retrospective one for which no fielder is credited.

              If the dismissal is obvious (for example when "bowled" and in most cases of "caught") the batsman will voluntarily leave the field without the umpire needing to dismiss them. Otherwise before the umpire will award a dismissal and declare the batsman to be out, a member of the fielding side (generally the bowler) must "appeal". This is invariably done by asking (or shouting) "how's that?" – normally reduced to howzat? If the umpire agrees with the appeal, he will raise a forefinger and say "Out!". Otherwise he will shake his head and say "Not out". Appeals are particularly loud when the circumstances of the claimed dismissal are unclear, as is always the case with lbw and often with run outs and stumpings.
              1. Bowled: the bowler has hit the wicket with the delivery and the wicket has "broken" with at least one bail being dislodged (note that if the ball hits the wicket without dislodging a bail it is not out).
              2. Caught: the batsman has hit the ball with his bat, or with his hand which was holding the bat, and the ball has been caught before it has touched the ground by a member of the fielding side.
              3. Leg before wicket (lbw): the ball has hit the batsman's body (including his clothing, pads etc. but not the bat, or a hand holding the bat) when it would have gone on to hit the stumps. This rule exists mainly to prevent the batsman from guarding his wicket with his legs instead of the bat. To be given out lbw, the ball must not bounce outside leg stump or strike the batsmen outside the line of leg-stump. It may bounce outside off-stump. The batsman may only be dismissed lbw by a ball striking him outside the line of off-stump if he has not made a genuine attempt to play the ball with his bat.
              4. Run out: a member of the fielding side has broken or "put down" the wicket with the ball while the nearest batsman was out of his ground; this usually occurs by means of an accurate throw to the wicket while the batsmen are attempting a run, although a batsman can be given out Run out even when he is not attempting a run; he merely needs to be out of his ground.
              5. Stumped is similar except that it is done by the wicketkeeper after the batsman has missed the bowled ball and has stepped out of his ground, and is not attempting a run.
              6. Hit wicket: a batsman is out hit wicket if he dislodges one or both bails with his bat, person, clothing or equipment in the act of receiving a ball, or in setting off for a run having just received a ball.
              7. Hit the ball twice is very unusual and was introduced as a safety measure to counter dangerous play and protect the fielders. The batsman may legally play the ball a second time only to stop the ball hitting the wicket after he has already played it. "Hit" does not necessarily refer to the batsman's bat.
              8. Obstructing the field: another unusual dismissal which tends to involve a batsman deliberately getting in the way (physically and/or verbally) of a fielder.
              9. Handled the ball: a batsman must not deliberately touch the ball with his hand, for example to protect his wicket. Note that the batsman's hand or glove counts as part of the bat while the hand is holding the bat, so batsmen are frequently caught off their gloves (i.e. the ball hits, and is deflected by, the glove and can then be caught).
              10. Timed out usually means that the next batsman was not ready to receive a delivery within three minutes of the previous one being dismissed.


              In the vast majority of cases, it is the striker who is out when a dismissal occurs. If the non-striker is dismissed it is usually by being run out, but he could also be dismissed for obstructing the field, handling the ball or being timed out.

              A batsman may leave the field without being dismissed. If injured or taken ill the batsman may temporarily retire, and be replaced by the next batsman. This is recorded as retired hurt or retired ill. The retiring batsman is not out, and may resume the innings later. An unimpaired batsman may retire, and this is treated as being dismissed retired out; no player is credited with the dismissal. Batsmen cannot be out bowled, caught, leg before wicket, stumped or hit wicket off a no ball. They cannot be out bowled, caught, leg before wicket, or hit the ball twice off a wide. Some of these modes of dismissal can occur without the bowler bowling a delivery. The batsman who is not on strike may be run out by the bowler if he leaves his crease before the bowler bowls, and a batsman can be out obstructing the field or retired out at any time. Timed out is, by its nature, a dismissal without a delivery. With all other modes of dismissal, only one batsman can be dismissed per ball bowled.

              Innings closed

              Main article: End of an innings (cricket)
              An innings is closed when:
              1. Ten of the eleven batsmen are out (have been dismissed); in this case, the team is said to be "all out"
              2. The team has only one batsman left who can bat, one or more of the remaining players being unavailable owing to injury, illness or absence; again, the team is said to be "all out"
              3. The team batting last reaches the score required to win the match
              4. The predetermined number of overs has been bowled (in a one-day match only, commonly 50 overs; or 20 in Twenty20)
              5. A captain declares his team's innings closed while at least two of his batsmen are not out (this does not apply in one-day limited over matches)

              Results

              Main article: Result (cricket)
              If the team that bats last is all out having scored fewer runs than their opponents, the team is said to have "lost by n runs" (where n is the difference between the number of runs scored by the teams). If the team that bats last scores enough runs to win, it is said to have "won by n wickets", where n is the number of wickets left to fall. For instance a team that passes its opponents' score having only lost six wickets would have won "by four wickets".

              In a two-innings-a-side match, one team's combined first and second innings total may be less than the other side's first innings total. The team with the greater score is then said to have won by an innings and n runs, and does not need to bat again: n is the difference between the two teams' aggregate scores.

              If the team batting last is all out, and both sides have scored the same number of runs, then the match is a tie; this result is quite rare in matches of two innings a side. In the traditional form of the game, if the time allotted for the match expires before either side can win, then the game is declared a draw.

              If the match has only a single innings per side, then a maximum number of deliveries for each innings is often imposed. Such a match is called a "limited overs" or "one-day" match, and the side scoring more runs wins regardless of the number of wickets lost, so that a draw cannot occur. If this kind of match is temporarily interrupted by bad weather, then a complex mathematical formula, known as the Duckworth-Lewis method after its developers, is often used to recalculate a new target score. A one-day match can also be declared a "no-result" if fewer than a previously agreed number of overs have been bowled by either team, in circumstances that make normal resumption of play impossible; for example, wet weather.

              Distinctive elements

              Individual focus

              For a team sport, cricket places individual players under unusual scrutiny and pressure. Bowler, batsman, and fielder all act essentially independently of each other. While team managements can signal bowler or batsman to pursue certain tactics, the execution of the play itself is a series of solitary acts. Cricket is more similar to baseball than many other team sports in this regard: while the individual focus in cricket is slightly mitigated by the importance of the batting partnership and the practicalities of running, it is enhanced by the fact that a batsman may occupy the wicket for a long time.

              Spirit of the Game

              Cricket is a unique game where in addition to the laws, the players must abide by the "Spirit of the Game". The standard of sportsmanship has historically been considered so high that the phrase "it's just not cricket" was coined in the 19th century to describe unfair or underhanded behaviour in any walk of life. In the last few decades though, cricket has become increasingly fast-paced and competitive, increasing the use of appealing and sledging, although players are still expected to abide by the umpires' rulings without argument, and for the most part they do. Beginning in 2001, the MCC has held an annual lecture named after Colin Cowdrey on the spirit of the game. Even in the modern game fielders are known to signal to the umpire that a boundary was hit, despite what could have been considered a spectacular save (though they might be found out by the TV replays anyway). In addition to this, some batsmen have been known to "walk" when they think they are out even if the umpire does not declare them out. This is a high level of sportsmanship, as a batsman can easily take advantage of incorrect umpiring decisions.

              Influence of weather




              Floodlight at M. A. Chidambaram Stadium, Chennai
              Cricket is a sport played predominantly in the drier periods of the year. But, even so, the weather is a major factor in all cricket matches.

              A scheduled game of cricket cannot be played in wet weather. Dampness affects the bounce of the ball on the wicket and is a risk to all players involved in the game. Many grounds have facilities to cover the cricket pitch (or the wicket). Covers can be in the form of sheets being laid over the wicket to elevated covers on wheels (using the same concept as an umbrella) to even hover covers which form an airtight seal around the wicket. However, most grounds do not have the facilities to cover the outfield. This means that in the event of heavy bouts of bad weather, games may be cancelled, abandoned or suspended due to an unsafe outfield.

              Another factor in cricket is the amount of light available. At grounds without floodlights (or in game formats which disallow the use of floodlights), umpires can stop play in the event of bad light as it becomes too difficult for the batsmen to be able to see the ball coming at them, (and in extreme cases, members of the fielding team).

              On the other hand, in instances of good light, batsmen can utilise sight-screens which enable batsmen to have a white background against which they can pick out the red ball (or black background for white ball) with greater ease.

              The umpires always have the final decision on weather related issues.

              Uniqueness of each field

              Unlike those of most sports, cricket playing fields can vary significantly in size and shape. While the dimensions of the pitch and infield are specifically regulated, the Laws of Cricket do not specify the size or shape of the field. The field boundaries are sometimes painted and sometimes marked by a rope. Pitch and outfield variations can have a significant effect on how balls behave and are fielded as well as on batting. Pitches vary in consistency, and thus in the amount of bounce, spin, and seam movement available to the bowler. Hard pitches are usually good to bat on because of high but even bounce. Dry pitches tend to deteriorate for batting as cracks often appear, and when this happens to the pitch, spinners can play a major role. Damp pitches, or pitches covered in grass (termed "green" pitches), allow good fast bowlers to extract extra bounce. Such pitches tend to offer help to fast bowlers throughout the match, but become better for batting as the game goes on. While players of other outdoor sports deal with similar variations of field surface and stadium covering, the size and shape of their fields are much more standardised. Other local factors, such as altitude and climate, can also significantly affect play. These physical variations create a distinctive set of playing conditions at each ground. A given ground may acquire a reputation as batsman friendly or bowler friendly if one or the other discipline notably benefits from its unique mix of elements. The absence of a standardised field affects not only how particular games play out, but the nature of team makeup and players' statistical records.

              Types of matches

              Cricket is a multi-faceted sport with multiple formats based around playing standard and level of formality and the desired time that the match should last. A pertinent division in terms of professional cricket is between matches limited by time in which the teams have two innings apiece, and those limited by number of overs, in which they have a single innings each. The former, known as first-class cricket, has a duration of three to five days (there have been examples of "timeless" matches too); the latter, known as limited overs cricket because each team bowls a limit of typically 50 or 20 overs, has a planned duration of one day only (a match can be extended if necessary due to bad weather, etc.).

              Typically, two-innings matches have at least six hours of playing time each day. Limited overs matches often last six hours or more. There are usually formal intervals on each day for lunch and tea with brief informal breaks for drinks. There is also a short interval between innings.

              Amateur cricketers rarely play matches that last longer than a single day; these may loosely be divided into declaration matches, in which a specified maximum time or number of overs is assigned to the game in total and the teams swap roles only when the batting team is either completely dismissed or declares; and limited overs matches, in which a specified maximum number of overs is assigned for each team's innings individually. These will vary in length between 30 and 60 overs per side at the weekend and the ever popular 20 over format during the evenings. Other forms of cricket, such as indoor cricket and garden cricket remain popular.

              Historically, a form of cricket known as single wicket had been extremely successful and many of these contests in the 18th and 19th centuries qualify as major cricket matches. In this form, although each team may have from one to six players, there is only one batsman at a time and he must face every deliver
              Source: Wikipedia (http://en.wikipedia.org/wiki/Cricket )
              Text is available under the Creative Commons Attribution-ShareAlike License
              Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

              Latest Cricket News